Lexmark T652 - Background (Fog) Check

Action Yes No
Step 8
Perform a print test.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Background (fog) check
ABCD
ABCD
ABCD
ABCD
Leading edge
Trailing edge
Action Yes No
Step 1
Check the media condition. If necessary, load new, dry,
recommended media, and then reprint the defective image.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Check the media transfer route, and then remove debris or
contamination if necessary.
Does the problem remain?
Go to step 3. Problem is solved.
Step 3
Check the print cartridge for proper installation. If necessary,
inspect, clean, and reinstall replace the print cartridge.
Does the problem remain?
Go to step 4. Problem is solved.
Step 4
Check the transfer roll assembly for contamination and wear. If
necessary, replace the transfer roll assembly. Go to
“Transfer roll
assembly removal” on page 314.
Does the problem remain?
Go to step 5. Problem is solved.
Step 5
Check the HVPS card assembly for proper connection, and replace
the connections if necessary.
Does the problem remain?
Go to step 6. Problem is solved.
4062
Diagnostic information
51