Lexmark T652 - Pick Roll Assembly Removal

9 Remove the wiring harness (F) from the pick arm assembly.
E
F
D
10 Remove the pick arm assembly.
Installation warning: When replacing the pick arm assembly, ensure that the harnesses are properly
rerouted.
Installation warning: When replacing the pick arm assembly, ensure that the connections are properly
replaced.
Pick roll assembly removal
1 Remove the media tray.
2 Gently pull the pick arm assembly down, and release the two hooks (A) securing the two pick roll assemblies.
A
A
3 Remove the two pick roll assemblies.
Installation warning: When replacing the pick roll assembly, do not touch the rubber surface.
4062
Repair information
322