5 Disconnect the connection (C) from the duplex assembly.
A
D
BC
Note: When removing the duplex assembly, the lower duplex drive belt (D) will become detached.
6 Remove the duplex assembly.
Installation warning: When replacing the duplex assembly, ensure that the lower duplex drive belt (D) is
properly reattached.
T652, T654, and T656 duplex input sensor assembly removal
1 Remove the media tray.
2 Gently place the printer on its left or right side.
3 Disconnect the connection (A) from the duplex input sensor assembly.
4 Remove the two screws (B) securing the duplex input sensor assembly to the machine.
BA
5 Remove the duplex input sensor assembly.
T652, T654, and T656 front duplex guide assembly removal
1 Remove the media tray.
2 Gently place the printer on its left or right side.
4062
Repair information
317
To Next Page
Loading...
