Configuration menu
Maintenance page count
When selected, the printer displays the current value for the maintenance kit counter. This counter tracks printer
usage. A print job containing a single page increments the counter by one, while a duplex print job increments
the counter by two.
If the value has reached the rated life of the maintenance kit, then scheduled maintenance is required.
Note: Reset the counter after the replacement maintenance kit is installed.
1 From the Configuration menu, select Maintenance Counter Value or Maint Cnt Value depending on your
printer model.
Note: This value cannot be changed.
2 Depending on your printer model, touch Back or press the Back button to return to the Configuration menu.
Maintenance page counter reset
After installing the maintenance kit, reset the maintenance counter.
1 From the Configuration menu, select Reset Maintenance Counter or Reset Cnt depending on your printer
model.
2 Depending on your printer model, touch Ye s or press the Select button to reset the counter.
Print quality pages
This option is a limited version of a similar setting that appears in the Diagnostics menu. To print the pages from
the Diagnostics menu, see
“PRINT TESTS” on page 237.
From the Configuration menu, select Print Quality Pages or Prt Quality Pgs depending on your printer model.
The print quality test pages, which contain a mixture of graphics and text, include the following information:
• Device information
• Printer revision levels
• Cartridge information
• Printer margin settings
• Minimum stroke width
Note: These pages are printed in English and must always be on letter, legal, or A4 paper.
Reports
Menu Settings Page
From the
Configurations
menu, navigate to Reports > Menu Settings Page.
4062
Service menus
255
To Next Page
Loading...
