Print cartridge ID connector assembly removal
1 Remove the print cartridge.
2 Remove the main drive motor assembly. Go to “Main drive motor assembly removal” on page 274.
3 Release the two hooks (A) securing the print cartridge ID connector assembly to the machine.
A
4 Remove the print cartridge ID connector assembly.
B
5 Disconnect the connection (B) from the print cartridge ID connector assembly.
T650 left side cover removal
1 Open the MPF tray door assembly.
2 Open the operator panel door assembly.
3 Remove the cover assembly, rear lower. Go to “T650 rear lower cover assembly removal” on page 326.
4062
Repair information
279
To Next Page
Loading...
