Output expander media bin latch (left and right) removal
1 Remove the output expander left or right inner cover. Go to “Output expander left inner cover removal”
on page 421 or “Output expander right inner cover removal” on page 422.
2 If removing the right side media bin latch, use a springhook to pull the media bin latch spring o the spring
post on the output expander frame.
3 If removing the left side media bin latch, just pull out on the bottom of the latch and pull the top
o
the boss.
4 Pull the media bin latch from its boss to remove.
Output expander media output bin assembly removal
1 Remove the left and right output expander media bin latches. Go to “Output expander media bin latch (left
and right) removal” on page 423.
2 Remove the standard output bin LED. Go to “Sensor (output expander pass through) removal” on
page 428.
4062
Repair information
423
To Next Page
Loading...
