Lexmark T652 - Action for Prompts; Jobs on Disk; Disk Encryption; Wipe Disk

Action for Prompts
This setting determines what action is required from the printer to resolve any paper- or envelope-related
change prompts.
1 From the Configuration menu, select Action for Prompts.
2 Select one of the following:
• Prompt User—Printer always requires user intervention to resolve the change prompt. This is the factory
default setting.
• Continue—Printer automatically assumes that the user selects Continue when a change prompt occurs.
• Use Current—Printer automatically assumes that the user selects Use Current when a change prompt
occurs.
3 Depending on your printer model, touch Submit or press the Select button to apply the changes.
Jobs on Disk
Note: This is applicable only to model T656.
This setting appears only if a hard disk is installed. This does not aect held or parked jobs.
1 From the
Configuration
menu, select Jobs on Disk.
2 Select one of the following:
• Delete—To delete the
buered
jobs saved on the disk.
• Do Not Delete—To cancel and return to the
Configuration
menu. This is the factory default setting.
Disk Encryption
Note: This is applicable only to model T656.
Warning—Potential Damage: If the settings are changed, then the printer completely formats the hard disk.
All information on the disk is unrecoverable.
This setting appears only if a hard disk is installed. It controls whether the printer encrypts the information that
it writes to the hard disk.
1 From the Configuration menu, select Disk Encryption.
2 Select one of the following:
• Enable—To enable encryption of the hard disk.
• Disable—To enable formatting of the hard disk.
3 Select Yes to proceed with the encryption or formatting of the disk.
A progress bar appears on the display that indicates the overall completion of the selected operation.
Wipe Disk
Note: This is applicable only to model T656.
4062
Service menus
259