4 Remove the fuser drive release linkage.
HVPS card assembly removal
1 Remove the side cover, right. Go to “T650 right side cover removal” on page 294 or “T652, T654, and
T656 right side cover removal” on page 295.
2 Remove the four screws (A) securing the HVPS card assembly to the machine.
3 Remove the HVPS card assembly.
4 Remove connection (B) and the two high voltage connections (C) from the HVPS card assembly.
C
A
B
Installation warning: When replacing the HVPS card assembly, ensure that the two high voltage
connections (C) are properly replaced.
4062
Repair information
288
To Next Page
Loading...
