Switch (media size) assembly removal
1 Remove the side cover, left. Go to “MPF cam gear removal” on page 337 or “T652, T654, and T656 left
side cover removal” on page 280.
2 Remove the six screws (A) securing the metal cover to the machine.
A
3 Remove the metal cover.
4 Remove the media tray.
5 Gently place the machine on the left of right side.
6 Release the two hooks (B) securing the switch (media size) assembly to the machine.
B C
7 Remove the switch (media size) assembly.
8 Disconnect the connection (C) from the switch (media size) assembly.
4062
Repair information
282
To Next Page
Loading...
