Sensor (5-bin mailbox media bin empty) removal
1 Remove the 5-bin mailbox left outer cover. Go to “5-bin mailbox left outer cover removal” on page 344.
2 Release the connecting tabs on the sensor (media bin empty) and remove from its bracket.
3 Disconnect the harness from the sensor (media bin empty).
5-bin mailbox controller card assembly removal
1 Remove the 5-bin mailbox left outer cover. Go to “5-bin mailbox left outer cover removal” on page 344.
2 Disconnect all the harnesses from the 5-bin mailbox controller card assembly.
4062
Repair information
350
To Next Page
Loading...
