3 Remove the 250-sheet tray media out actuator from the drawer.
A
250-sheet tray frame assembly removal
Note: The 250-sheet tray frame assembly is not a FRU.
1 Remove the 250-sheet tray pick arm bracket assembly. Go to “250-sheet tray pick arm bracket assembly
removal” on page 359.
2 Release the hooks securing the sensor (pass through) to the drawer.
3 Remove the sensor (pass through) from the drawer.
4 Remove the four screws (A) securing the 250-sheet tray frame assembly to the drawer.
A
4062
Repair information
361
To Next Page
Loading...
