8 Remove the alignment assembly.
DC
Installation warning: When replacing the alignment assembly, ensure that the media skew is properly
adjusted using the adjuster screw (C) or jamming will occur. Go to
“Alignment assembly adjustment” on
page 268.
Main cooling fan removal
1 Remove the side cover, left assembly. Go to “MPF cam gear removal” on page 337 or “T652, T654, and
T656 left side cover removal” on page 280.
2 Remove the six screws (A) securing the metal shield to the machine.
A
3 Move the metal shield in the direction of the arrow.
4062
Repair information
273
To Next Page
Loading...
