5-bin mailbox media bin full actuator removal
1 Remove the 5-bin mailbox left inner cover. Go to “5-bin mailbox left inner cover removal” on page 344.
2 Grasp the media bin full actuator and pull the pins from the bosses.
Sensor (5-bin mailbox pass through) removal
1 Remove the 5-bin mailbox left outer cover. Go to “5-bin mailbox left outer cover removal” on page 344.
2 If the lower pass through sensor needs to be removed, first remove the 5-bin mailbox rear door assembly.
Go to
“5-bin mailbox rear door assembly removal” on page 343.
4062
Repair information
348
To Next Page
Loading...
