Media turn guide removal
1 Remove the MPF tray door assembly. Go to “T650, T652, and T654 MPF tray door assembly removal” on
page 302.
2 Gently bend the left side of the media turn guide to release the hook (A) as shown in the picture.
A
3 While gently bending the media turn guide, move the media turn guide in the direction of the arrow.
4 Remove the media turn guide.
Installation warning: When replacing the media turn guide, ensure that it is properly installed, or jamming
will occur.
MPF lift plate assembly removal
1 Remove the media turn guide. Go to “Media turn guide removal” on page 300.
2 Remove the four screws (A) securing the MPF lift plate assembly to the machine.
3 Gently detach the MPF lift plate assembly.
4062
Repair information
300
To Next Page
Loading...
