Tray roller catch assembly removal
1 Remove the media tray catch spring. Go to “Media tray catch spring removal” on page 412.
2 Remove the tray roller catch assembly from the drawer.
Tray roller catch assembly removal
1 Remove the media tray catch spring. Go to “Media tray catch spring removal” on page 414.
2 Remove the tray roller catch assembly from the drawer.
Upper interface cable assembly removal
1 Remove the 550-sheet frame assembly. Go to “Media size actuator removal” on page 414.
2 Disconnect the upper interface cable connector (A) from the 550-sheet controller card.
4062
Repair information
419
To Next Page
Loading...
