Lexmark T652 - Maintenance; Inspection guide; Individual maintenance part expected life; Scheduled maintenance

To Next Page

To Previous Page

Maintenance

Inspection guide

The purpose of this inspection guide is to aid you in identifying unsafe conditions.

If any unsafe conditions exist, ﬁnd out how serious the hazard could be and if you can continue before you

correct the hazard.

As you service the machine, check for the following:

• Damaged, missing, or altered parts, especially in the area of the On/O switch and the power supply

• Damaged, missing, or altered covers, especially in the area of the top cover and the power supply cover

• Possible safety exposure from any non-Lexmark attachments

Individual maintenance part expected life

Description Part Maintenance Interval

Charge roll assembly with tool 40X0127 300K

Transfer roll assembly with tool 40X1886 300K

Pick roll assembly (2) 40X4308 300K

Printer maintenance kit (100 V type 1 fuser) 40X4723 300K

Printer maintenance kit (110 V type 1 fuser) 40X4724 300K

Printer maintenance kit (220 V type 1 fuser) 40X4765 300K

Printer maintenance kit (100 V type 2 fuser) 40X4766 150K

Printer maintenance kit (110 V type 2 fuser) 40X4767 150K

Printer maintenance kit (220 V type 2 fuser) 40X4768 150K

Scheduled maintenance

The control panel displays an 80.xy error when it reaches 200K page counts. It is necessary to install the

appropriate maintenance kit to maintain the print quality and reliability of the printer. Reset the maintenance

counter after replacing the maintenance kit.

Maintenance kits