Lexmark T652 - 37 Insufficient Memory for Flash Memory Defragment Operation; 37 Insufficient Memory to Collate Job; 37 Insufficient Memory, some Held Jobs Were Deleted; 37 Insufficient Memory, some Held Jobs will Not be Restored

37 Insucient memory for Flash Memory Defragment operation
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to stop the defragment
process and continue printing.
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
37
Insucient
memory to collate job
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to print the portion of the job
already stored and begin collating the rest of the print job.
• Cancel the current print job.
37
Insucient
memory, some held jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Press the arrow buttons until
Continue appears, and then press to clear the message.
37 Insucient memory, some Held Jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press the arrow buttons until
Continue appears, and then press to clear the message.
38 Memory full
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to clear the message.
• Cancel the current print job.
• Install additional printer memory.
39 Complex page, some data may not have printed
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to clear the message and
continue printing.
• Cancel the current print job.
• Install additional printer memory.
4062
Diagnostic information
173