4 Unsnap the fuser access door assembly from the machine.
5 Remove the fuser access door assembly.
Fuser unit assembly removal
1 Remove the fuser wiper cover assembly. Go to “Fuser wiper cover assembly removal” on page 332.
2 Remove the door assembly, rear. Go to “Rear door assembly removal” on page 327.
3 Open the fuser access door.
4 Press the two buttons (A) on the fuser unit assembly to release it from the machine.
5 While pressing the two buttons (A), pull the fuser unit assembly from the machine.
B
A
Installation warning: When replacing the fuser unit assembly, ensure that the electrical connection (B)
and the two buttons (A) are properly secured.
Redrive assembly removal
1 Remove the door assembly, rear. Go to “Rear door assembly removal” on page 327.
2 Open the fuser access door.
3 Remove the two screws (A) securing the redrive assembly to the machine.
4 Press the two tabs (B) to release the redrive assembly to the machine.
4062
Repair information
331
To Next Page
Loading...
