6 Disconnect the connector (C) from the LVPS card assembly.
C
7 Remove the LVPS card assembly.
Installation warning: When replacing the LVPS card assembly, ensure that all connections are replaced.
Installation warning: When replacing the LVPS card assembly, ensure that the connector pins (D)
properly engage the system card.
Installation warning: When replacing the LVPS card assembly, ensure that the voltage selection switch
(E) is set to the proper setting, or damage will occur.
D
E
Print cartridge cooling fan removal
1 Remove the side cover, right. Go to ““T650 right side cover removal” on page 294 or “T652, T654, and
T656 right side cover removal” on page 295.
2 Remove the screw (A) securing the print cartridge cooling fan to the machine.
3 Remove the print cartridge cooling fan.
4062
Repair information
293
To Next Page
Loading...
