High capacity input tray (HCIT) tray closed latch with spring removal
The left and right tray closed latches with springs are the same, and only one is in a package. The instructions
below are for removing the left latch; removing the right latch has similar instructions.
1 Remove the HCIT media tray assembly. Go to “High capacity input tray (HCIT) media tray assembly
removal” on page 372.
2 Remove the E-clip (A) and the washer (B) with a prying tool securing the HCIT tray closed latch with spring
to the left frame.
A
B
3 Remove the HCIT tray closed latch with spring.
High capacity stacker removals
High capacity stacker rear door assembly removal
1 Open the rear door assembly.
2 Remove the rear door strap by twisting vertically and pulling it out of the slot.
4062
Repair information
389
To Next Page
Loading...
