Lexmark T652 - Paper Types and Weights Supported by the Output Bins

Paper type 250‑ or 550‑sheet
trays (standard or
optional)
Optional
2000‑sheet tray
Multipurpose feeder Duplex unit
Card stock
Envelopes X X X
Labels
1
• Paper
• Vinyl
Transparencies
1
Printing labels requires a special label fuser cleaner which is included with the special cartridge required for label
applications.
Paper types and weights supported by the output bins
Use this table to determine the possible output destinations of print jobs which use supported paper types and
weights. The paper capacity of each output bin is listed in parentheses. Paper capacity estimations are
calculated based on 75 g/m
2
(20 lb) paper.
The finisher supports 60–176 g/m
2
(16–47 lb) paper weights.
Paper type Standard exit bin
(350 or 550
sheets)
Optional hardware
Output Expander
(550 sheets) or High
Capacity Output
Stacker (1850 sheets)
5‑Bin Mailbox
(500 sheets)
1
StapleSmart
TM
II
Finisher
(500 sheets)
2
Paper
• Plain
• Bond
• Colored
• Custom
• Letterhead
• Light
• Heavy
• Preprinted
• Rough/Cotton
• Recycled
Card stock XX
Envelopes
XX
1
Supports 60‑90 g/m
2
(16‑24 lb) paper weights.
2
Maximum of 50 sheets of 75 g/m
2
(20 lb) paper per stapled packet. Results may vary with heavier paper.
3
Printing labels requires a special label fuser cleaner which is included with the special cartridge required for label
applications.
4062
General information
32