Laser cover removal
1 Remove the output cover assembly. Go to “Output cover assembly removal” on page 333.
2 Remove the fuser wiper cover assembly. Go to “Fuser wiper cover assembly removal” on page 332.
3 Remove the side cover, left. Go to “T650 left side cover removal” on page 279 or “T652, T654, and T656
left side cover removal” on page 280.
4 Remove the side cover, right. Go to “T650 right side cover removal” on page 294 or “T652, T654, and
T656 right side cover removal” on page 295.
5 Remove the five screws (A) securing the laser cover to the machine.
A
A
Warning—Potential Damage: When removing the laser cover, ensure that the standard bin actuator
assembly does not become damaged.
4062
Repair information
289
To Next Page
Loading...
