Lexmark T652 - RFID Error Service Check

Action Yes No
Step 6
Reset the active media bin.
Does the problem remain?
Contact next level of
support.
Problem is solved.
RFID error service check
Action Yes No
Step 1
Use new RFID media.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Reinstall the RFID firmware card, RFID interface card, RFID cable,
and RFID option. Go to
“RFID UHF option installation and
removal” on page 402.
Does the problem remain?
Go to step 3. Problem is solved.
Step 3
Replace the RFID option. Go to
“RFID UHF option installation and
removal” on page 402.
Does the problem remain?
Contact next level of
support.
Problem is solved.
RFID error service check
Action Yes No
Step 1
Check the datastream for errors, and correct the errors if
necessary.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Reinstall the RFID firmware card, RFID interface card, RFID cable,
and RFID option. Go to
“RFID UHF option installation and
removal” on page 402.
Does the problem remain?
Go to step 3. Problem is solved.
Step 3
Replace the RFID option. Go to
“RFID UHF option installation and
removal” on page 402.
Does the problem remain?
Contact next level of
support.
Problem is solved.
4062
Diagnostic information
186