Sensor (toner empty) removal
1 Remove the HVPS card assembly. Go to “HVPS card assembly removal” on page 288.
2 Remove the screw (A) securing the sensor (toner empty) to the machine.
3 Remove the sensor (toner empty).
4 Disconnect the connection (B) from the sensor (toner empty).
B
A
Sensor (input) removal
1 Remove the inner deflector. Go to “Inner deflector removal” on page 299.
2 Release the hooks (A) securing the sensor (input) to the machine.
A
4062
Repair information
296
To Next Page
Loading...
