Lexmark T652 - Horizontal White Stripes and Bands (Side to Side Direction) Check

Action Yes No
Step 6
Check the printhead assembly for proper connection. If necessary,
replace the connections or the printhead assembly. Go to
“T650
printhead assembly removal” on page 334 and “T652, T654,
and T656 printhead assembly removal” on page 336.
Does the problem remain?
Go to step 7. Problem is solved.
Step 7
Perform a print test.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Horizontal white stripes and bands (side to side direction) check
Leading edge
Trailing edge
Action Yes No
Step 1
Check the media condition. If necessary, load new, dry,
recommended media, and then reprint the defective image.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Remove debris or contamination from the media transfer route and
the media path.
Does the problem remain?
Go to step 3. Problem is solved.
Step 3
Check the toner level, and replace the print cartridge if necessary.
Does the problem remain?
Go to step 4. Problem is solved.
Step 4
Check the transfer roll assembly for contamination and wear. If
necessary, replace the transfer roll assembly. Go to
“Transfer roll
assembly removal” on page 314.
Does the problem remain?
Go to step 5. Problem is solved.
4062
Diagnostic information
45