Resetting active bin
Wait for the message to clear.
Resetting the printer
Wait for the message to clear.
Resetting without replacing may aect print quality.
You selected No from the “Verify PC unit replaced” screen. Wait for the message to clear.
Restoring Factory Defaults
Wait for the message to clear.
When factory default settings are restored:
• All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol
sets.
• All settings return to the factory defaults except the Display Language setting in the Setup menu and
the custom settings in the Serial <x>, Network, Infrared, LocalTalk, and USB menus.
Restore Held Jobs?
Try one of the following:
• Press the arrow buttons until Continue appears, and then press to restore all held jobs stored
on the printer hard disk.
• Press the arrow buttons until Do not restore appears, and then press . No print jobs will be
restored.
Restoring Held Job(s) x/y
x represents the number of jobs being restored. y represents the total number of jobs to be restored.
Try one or more of the following:
• Wait for the message to clear.
• Press the arrow buttons until Quit restoring appears, and then press to delete unrestored
held jobs.
Routine maintenance needed
The printer needs to have routine maintenance done. Order a maintenance kit, which contains all the items
necessary to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
4062
Diagnostic information
169
To Next Page
Loading...
