Inner deflector removal
Note: The MPF lift plate assembly can be detached and allowed to hang by the harness. The connection to
the MPF lower
deflector
assembly does not need to be disconnected.
1 Remove the MPF lift plate assembly. Go to “MPF lift plate assembly removal” on page 300.
2 Release the two hooks (A) securing the lower portion of the inner deflector to the machine.
A
3 Remove the inner deflector.
Installation warning: When replacing the inner deflector, ensure that it is properly installed, or jamming
will occur.
4062
Repair information
299
To Next Page
Loading...
