Lexmark T652 - Reattach bin <X; Reattach bin <X> - <Y; Reattach Envelope Feeder

Reattach bin <x>
Try one or more of the following:
• Turn the printer o and then back on.
If the error occurs a second time:
1 Turn the printer
o.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bin.
4 Reattach the bin.
5 Connect the power cord to a properly grounded outlet.
6 Restart the printer.
If the error occurs again:
1 Turn the printer o.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bin.
4 Contact Customer Support.
• Press to clear the message and print without using the specified bin.
Reattach bin <x> – <y>
Try one or more of the following:
• Turn the printer o and then back on.
If the error occurs a second time:
1 Turn the printer
o.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bins.
4 Reattach the bins.
5 Connect the power cord to a properly grounded outlet.
6 Restart the printer.
• Press to clear the message and print without using the specified bins.
Reattach envelope feeder
Try one or more of the following:
• Turn the printer o and then back on.
If the error occurs a second time:
1 Turn the printer
o.
2 Unplug the power cord from the wall outlet.
3 Remove the envelope feeder.
4062
Diagnostic information
167