EasyManua.ls Logo

Lexmark T652 - Page 182

Lexmark T652
596 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error code Description Action
54 The printer was not able to connect with the
standard network.
See
“Network software eror service check” on
page 190.
54 The printer was not able to connect with an
optional network.
55 The internal option installed is unsupported. See
“Unsupported Option in Slot [x] service
check” on page 190.
56 The parallel port or serial port is disabled. See
“Network service check” on page 188.
56 The standard or optional USB port is disabled. See
“Network software eror service check” on
page 190.
58 Optional input trays installed above the RFID
option or no input trays installed
See
“Invalid Tray Configuration service check”
on page 191.
58 Excess bins detected. See
“Too Many Bins Attached service check”
on page 191.
58 Excess disks detected. See
“Too Many Disks Attached service check”
on page 191.
58 Excess flash options detected. See
“Too Many Flash Options service check” on
page 191.
58 Excess trays detected. See
“Too Many Trays Attached service check”
on page 192.
59 The duplex option is incompatible. See
“Incompatible Duplex service check” on
page 192.
59 The envelope feeder is incompatible. See
“Incompatible Duplex service check” on
page 192.
59 The output bin is incompatible. See
“Incompatible Output Bin [x] service
check” on page 192.
59 The tray is incompatible. See
“Incompatible Output Tray [x] service
check” on page 193.
61 The hard disk is defective. See
“Defective Disk service check” on
page 193.
62 The hard disk is full. See
“Disk Full service check” on page 193.
80 The printer requires maintenance. The
appropriate maintenance kit needs to be
installed.
See
“Routine Maintenance Needed service
check” on page 193.
81 The fuser that had been previously installed in a
dierent printer has reached its maximum page
count.
Go to
“Replace fuser service check” on
page 194.
88 The toner cartridge supply is low. See
“Replace cartridge service check” on
page 194.
88 The toner cartridge supply is very low.
88 The toner cartridge supply is empty.
4062
Diagnostic information
182

Table of Contents

Related product manuals