Lexmark T652 - Page 230

Motor (HCIT tray lift) service check
Action Yes No
Step 1
Check and remove all obstructions in the HCIT lift area.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Check the connections on the HCIT tray lift motor assembly for
proper connections.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Replace the HCIT tray lift drive motor assembly. Go to
“High
capacity input tray (HCIT) tray lift drive motor assembly removal”
on page 382.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
RAM memory error service check
Action Yes No
Replace the appropriate module.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Output option is missing service check
Action Yes No
Step 1
a Turn o the main power.
b Remove, and then reinstall the output option.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Check all the output option interface connections, and if necessary,
replace the connections.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
4062
Diagnostic information
230