3 Remove the three screws (A) securing the duplex drive motor assembly to the machine.
B
A
Note: When removing the duplex drive motor assembly, the upper duplex drive belt (B) will become
detached.
4 Remove the band (C) from the duplex drive motor assembly.
C
5 Remove the cover from the duplex drive motor assembly.
6 Disconnect the connection (D) to the duplex drive motor assembly.
7 Remove the harness (E) from the duplex drive motor assembly.
Installation warning: When replacing the duplex drive motor assembly, ensure that all harnesses are
properly re-routed.
Installation note: Ensure the belt is replaced properly.
4062
Repair information
329
To Next Page
Loading...
