Lexmark T652 - Page 488

Assembly 12: HCIT Sheet option tray assembly
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X4579 1 1 Complete HCIT option tray assembly --
2 40X4590 1 2 HCIT pick arm bracket assembly --
340X4595 1 1Pick arm sensor cable assembly --
4 40X4591 1 1 HCIT bellcrank recoil spring --
5 40X4308 2 2 Pick roll assembly (2) --
6 40X4369 2 1 Sensor (media low) --
7 40X8310 1 1 HCIT media out actuator --
8 40X4369 2 1 Sensor (media empty) --
940X4581 1 1HCIT cover, rear --
10 40X4570 1 1 Anti-tip latch assembly --
11 40X4588 1 1 Sensor (HCIT tray raised HP) with cable
assembly
--
12 40X4582 1 1 HCIT cover, right --
13 40X4586 1 1 HCIT tray lift drive motor assembly --
14 40X4585 1 2 HCIT tray closed latch with spring --
15 40X4593 2 2 HCIT drawer slide assembly --
16 40X4580 1 1 HCIT media tray assembly --
17 40X4584 1 1 HCIT tray cover, front --
18 40X4589 1 2 Sensor (HCIT pass through) with cable --
19 40X4594 1 1 HCIT interface cable assembly --
20 40X4592 1 1 HCIT controller card assembly --
21 40X4587 1 4 HCIT media size actuator assembly --
22 40X4583 1 1 HCIT cover, left --
4062
Parts catalog
488