Pick arm assembly
#Part
1 Media out actuator
2 Sensor (media empty)
3 Pick roll assemblies
4 Sensor (media low)
5 Sensor (media empty)
6 Pick roll assemblies
7 Sensor (media low)
8 Media out actuator
Since all media trays are functionally equivalent in terms of the switch (media size), sensor (media empty), sensor
(media low), only the components of one tray are described here.
The pick arm assembly is a mechanical unit supplying media from the media tray assembly to the printer. The
driving force, from the pick arm drive motor on the pick arm assembly, is transmitted to the two pick rolls to
feed media.
4062
Appendix C: Theory of operation
523
To Next Page
Loading...
