Lexmark T652 - Page 60

Error code Description Action
200.17 Sensor (input) lingering jam (tray 1 and tray level
not low)
The media reached the sensor (input) but did not
clear it within the
specified
time.
Go to
“Sensor (input) lingering jam service
check” on page 65.
200.18 Sensor (input) lingering jam (tray 1 and tray level
low)
The media reached the sensor (input) but did not
clear it within the specified time.
200.19 Sensor (input) lingering jam (tray 1 and tray level
empty)
The media reached the sensor (input) but did not
clear it within the specified time.
200.27 Sensor (input) lingering jam (tray 2 and tray level
not low)
The media reached the sensor (input) but did not
clear it within the
specified
time.
200.28 Sensor (input) lingering jam (tray 2 and tray level
low)
The media reached the sensor (input) but did not
clear it within the
specified
time.
200.29 Sensor (input) lingering jam (tray 2 and tray level
empty)
The media reached the sensor (input) but did not
clear it within the specified time.
200.32 Operator panel door assembly switch failure
Operator panel door assembly not fully closed.
Interlock switch not functioning correctly.
Go to
“Operator panel door assembly switch
failure service check” on page 76.
200.34 Sensor (toner empty) failure
The sensor (toner empty) has failed or is not
sensing the pulse wheel on the print cartridge.
Go to
“Sensor (toner empty) service check” on
page 77.
4062
Diagnostic information
60