DRIVE SHAFT
03–13–1
03–13
03–13 DRIVE SHAFT
REAR DRIVE SHAFT OUTLINE . . . . . . . 03–13–1 REAR DRIVE SHAFT
CROSS-SECTIONAL VIEW . . . . . . . . . . 03–13–1
End of Toc
REAR DRIVE SHAFT OUTLINE
CHU031325600S01
• For the axle-side joint, a bell-shaped constant velocity joint has been adopted, reducing vibration and noise.
• For the differential-side joint, a tripod-shaped constant velocity joint has been adopted to reduce slide
resistance, vibration and noise, as well as booming noise during high-speed driving.
End Of Sie
REAR DRIVE SHAFT CROSS-SECTIONAL VIEW
CHU031325600S02
End Of Sie
MT
AT
AXLE-SIDE
BELL JOINT
DIFFERENTIAL-SIDE
TRIPOD JOINT
AXLE-SIDE
BELL JOINT
DIFFERENTIAL-SIDE
TRIPOD JOINT
CHU0313S001
To Next Page
