AIR BAG SYSTEM
08–10–10
CURTAIN AIR BAG MODULE CONSTRUCTION/OPERATION
CHU081000171S02
Construction
• The curtain air bag modules are equipped along the roof edge between the A and B pillars.
• The curtain air bag module is composed of the inflator, pipe, bag cover, and air bag.
• When the curtain air bag deploys, the A-pillar trim and headliner is spread apart by argon gas generated from
the inflator, inflating the air bag.
Operation
Air bag module deployment operation
• Refer to SAS CONTROL MODULE DESCRIPTION, Air Bag Module and Pre-tensioner Seat Belt Deployment
Operation. (See 08–10–4 SAS CONTROL MODULE CONSTRUCTION/OPERATION.)
CURTAIN AIR BAG MODULE
AIR BAG
AIR BAG
COVER
AIR BAG
COVER
PIPE
AIR BAG
AIR BAG
CHU0810S104
To Next Page
