INSTRUMENTATION/DRIVER INFO.
09–22–7
09–22
INPUT/OUTPUT CHECK MODE OPERATION
CHU092255430S06
Operation procedure
• Refer to RX-8 Workshop Manual.
Input circuit check
• When the parts listed in the chart are operated and output a signal to the instrument cluster, the built in
microcomputer judges the quality of the input circuit based on that signal.
Check
code
Parts sending input signal
01 Buckle switch
04 Door switch
08 TNS relay
22 Fuel gauge sender unit
31 Key reminder switch
Check
code
Parts sending input signal
BUCKLE
SWITCH
INSTRUMENT
CLUSTER
MICROCOMPUTER
LCD
DOOR
SWITCH
KEY REMINDER
SWITCH
FUEL GAUGE
SENDER UNIT
TNS
RELAY
CHU0922S004