INSTRUMENTATION/DRIVER INFO.
09–22–8
Individual circuit check
• By operating the parts listed in the chart, the built in microcomputer judges the quality of the individual parts.
PID/Data Monitor and Record
• The PID/data monitoring items for the instrument cluster is as shown in the table below.
Monitor item table
—: Not applicable
End Of Sie
LIGHTS-ON REMINDER WARNING ALARM OUTLINE
CHU092255430S07
• Warns the driver that the headlights or TNS are on when the driver-side door is opened.
End Of Sie
Check
code
Parts sending input signal
12 Speedometer
13 Tachometer
14 Buzzer
16 Fuel-level warning light
18 Ignition key illumination
23 Fuel gauge
25 Water temperature gauge
26 LCD
Check
code
Parts sending input signal
IGNITION KEY
ILLUMINATION
MICROCOMPUTER
BUZZER
SPEEDOMETER
TACHOMETER
WATER
TEMPERATUER GAUGE
OIL PRESSURE
GAUGE
FUEL
GAUGE
LCD
CHU0922S005
PID item Definition Unit/Condition Terminal
CCNT_HE Continuous codes Number of continuous codes —
ECT_GAUGE Temperature gauge °C °F
1J, 1L
FUEL Fuel flow l/min
ODOMETR Total distance km mile
SPEEDSG Speedometer mph km/h
RPM Tachometer rpm