CLUTCH
05–10–2
CLUTCH MASTER CYLINDER
CHU051001025S03
• The clutch master cylinder consists of a primary cup, spacer, piston, and a return spring.
End Of Sie
CLUTCH RELEASE CYLINDER
CHU051001025S04
STRUCTURE
• The clutch release cylinder consists of a return spring, piston, push rod and a bleeder screw for bleeding air.
• Due to spring pressure maintaining play between the push rod end and the release fork at zero, an automatic
adjusting, maintenance-free design has been achieved.
End Of Sie
RETURN SPRING
PISTON
PRIMARY CUP
SPACER
CHU0510T004
RETURN SPRING
PISTON
PUSH ROD
BLEEDER SCREW
CHU0510N003
To Next Page
