ON-BOARD DIAGNOSTIC
06–02–5
06–02
DLC-2 CONSTRUCTION
CHU060201038S06
• A DLC-2 connector conforming to ISO (International Organization for Standardization) standards has been
added.
• Shape and terminal arrangement as stipulated by the ISO 15031-3 (SAE J1962) international standard has
been adopted for this connector. The connector has a 16-pin construction that includes the CAN_H, CAN_L,
GND1, GND2 and B+ terminals.
End Of Sie
Terminal Function
CAN _L Serial communication terminal (Lo)
CAN_H Serial communication terminal (Hi)
GND1 Body GND terminal
GND2 Serial communication GND terminal
B+ Battery power supply terminal
B+ CAN_L
GND1
CAN_H
GND2
DLC-2
CHU0602S002
To Next Page
