ASAP 2460 Operator’s Manual Show Dashboard
246-42800-01 - Aug 2013 4-21
Manifold outgas rate
(continued)
Nitrogen p
o
Displays statistics of the saturation pressures measured with
nitrogen gas at liquid nitrogen temperatures. The mean, two-
sigma, minimum, and maximum values display.
The gauge is updated when a p
o
is logged with nitrogen as the
adsorptive. To reset these numbers right click on the window
then click the Reset
Gauge Description (continued)
At 60%, the center
green LED turns off.
OnOn
At 90%, three green LEDs
turn off and the yellow
LED is turned on.
On
At 110% and above,
only the red LED is
lit and attention is
required.
On
To Next Page
Loading...
Need help?
General
