Appendix B ASAP 2460 Operator’s Manual
B-2 246-42800-01 - Dec 2013
2432- Invalid response from MMI ‘FILE_READ’ request.
Cause: An internal processing and/or hardware error has occurred.
Action: Contact your service representative if yo
u continue to receive this error
message.
2433- New entries have been found in this directory. Refresh the directory
information?
Cause: Several ASAP 2460 files (sample information, analysis conditions,
adsorptive properties, or report options) have been added to this direc-
tory by some function other than the ASAP 2460 program.
Action: Select
Yes to update the directory information with data from each new
file. This operation may take a minute.
Select
No if you do not want to spend the time updating the directory
information. This option may be feasible if a large number of files have
been copied into the directory and you know the name of the file you
wish to access.
2434- File (file name) — Subset # (number) wrote (number) bytes, expected (number)
bytes.
Cause: An internal processing and/or hardware error has occurred.
Action: Contact your service representative if yo
u continue to receive this error
message.
2438- Cannot open scheduling diagnostic data save file.
Cause: Could not create necessary files for running scheduled diagnostic tests.
Action: 1. Ensure that the disk is not write-protected.
2439- Could not register file.
2440- Subset not found.
2441- Seek within file failed.
2442- Bad header in subset file.
2443- Subset owner denied access.
2. Ensure that the hardware subdirectory (from the program
directory) exists.
To Next Page
Loading...
Need help?
General
