ASAP 2460 Operator’s Manual Appendix B
246-42800-01 - Dec 2013 B-11
2506- Sample file (filename) has "No Analysis" status and cannot be used for this
operation.
Cause: The action you are trying to perform requires a file with collected data.
Action: Choose a sample file containing collected da
ta (Complete, Analyzing,
or Entered status).
2508- The selected file (filename) does not contains a valid script.
Cause: The specified test file is invalid.
Action: Choose another file.
2513- Unable to read the calibration file (file name).
Cause: You selected an invalid calibration file or one that cannot be read.
Action: Be sure the media containing the calibration
file has no problems.
2514- Unable to write the calibration file (file name).
Cause: An attempt to Save calibration data has failed due to possible media
problems.
Action A: Be sure the media you want to Save the
file to has no problems.
Action B: Choose an alternate media to
Save the calibration data.
2515- Warning: Changing the calibration information will affect the performance of
the instrument. Only qualified service personnel should do this. Do you wish to
proceed?
Action: Contact your service representative.
Cause: You have started the process of performing a calibration operation.
To Next Page
Loading...
