ASAP 2460 Operator’s Manual Performing an Analysis
246-42800-01 - Aug 2013 2-41
7. Click Start to start the analysis. A window displays data as they are collected. A short delay is
encountered before the port status at the bottom of the window changes from the Idle state.
8. If you wish to view an analysis report, click the appropriate
Report Port button.
9. When the analysis is complete, the
Next button is displayed. Click Close to exit or Next to perform
another analysis. If you click
Next, the first view of the Analysis dialog is displayed.
To Next Page
Loading...
Need help?
General
