3 - 15
SpO2 Sensitivity For Masimo SpO
2
modules, see 8.6.4 Setting
SpO
2
Sensitivity (for Masimo SpO
2
). For
Mindray SpO
2
modules, see 8.6.8 Changing
the Sensitivity (for Mindray SpO
2
).
Both
Display PI Sets whether to display PI in the SpO
2
parameter area.
Speed Sets the sweep speed of Pleth waveforms.
NIBP Simul Switch on for patients performing SpO
2
and
NIBP monitoring on the same limb. The SpO
2
alarm status is locked until the NIBP
measurement ends.
Continuous
Monitoring
PR Pulse Volume Sets the pulse volume. Both
Irr. PR Switch Selects whether to enable the Irregular PR
function. If enabled, you can mark the pulse
as regular or irregular on the PR screen.
Spot Check
Temp Measurement Site
(Manual)
Sets the default measurement site for Temp
measurement.
Both
RR Timer Reminder
Interval
Sets the interval of reminder tone for the
timer used for manual RR. For details, see
13.5.5 Setting Timer Interval.
Both
Apnea Delay
(Adult)/(Ped)/
(Neo)
Sets the delay for giving an Apnea alarm. Continuous
Monitoring
Tab Menu Item Description Work Mode
To Next Page
Loading...
