Mitutoyo HR-530 Series - Page 155

No. 99MBG518A
E-3
PART E : 1 Test Flow
1.2
Method to Set a Group and Test Multiple Points
Thissectionexplainstheoperationowtosetagroupandtestmultiplepoints.
Preparation
Test method settings
"3.1 Test Method Settings" (page
E-23)
Display conditions settings
"3.2 Display Conditions Settings"
(page E-24)
Indenter and test force settings
"3.3 Indenter and Test Force Set-
tings" (page E-25)
Indenter mounting
"3.4 Mounting the Indenter" (page
E-25)
Test time settings
"3.5 Test Time Settings" (page
E-25)
■When setting a GO/NG judgment
GO/NG judgment settings
"3.6 GO/NG Judgment Settings"
(page E-25)
Group settings
"3.7 Group Settings" (page E-26)
Testing the test block
"3.8 Testing the Test Block" (page
E-28)
Correction value setup
"3.9 Correction Value Setup" (page
E-31)