Mitutoyo HR-530 Series - Method to Set a Group and Test Multiple Points; Method to Fix the Test Position and Test; Method to Execute Continuous Tests

xviii
No. 99MBG518A
2.5 Correction Value Settings ……………………………………………………… D-9
2.6 GO/NG Judgment Settings ……………………………………………………… D-9
2.7 Test for the Specimen for Obtaining the Correction Value ……………………D-10
2.7.1 Setting the Specimen for Obtaining the Correction Value ……………………………D-10
2.7.2 Executing the Test ………………………………………………………………………D-12
2.8 Correction Value Setup …………………………………………………………D-14
2.9 Setting the Specimen ……………………………………………………………D-15
2.10 Executing the Test ………………………………………………………………D-17
2.11 ConrmingtheTestResults ……………………………………………………D-19
2.11.1 ConrmingontheScreen ………………………………………………………………D-19
2.11.2 ConrmingwithExternalOutput ………………………………………………………D-19
3 Method to Set a Group and Test Multiple Points …………………………………D-21
3.1 Test Method Settings ……………………………………………………………D-21
3.2 Display Conditions Settings ………………………………………………… D-22
3.3 Mounting the Indenter ………………………………………………………… D-23
3.4 Test Time Settings …………………………………………………………… D-23
3.5 Correction Value Settings …………………………………………………… D-23
3.6 GO/NG Judgment Settings …………………………………………………… D-23
3.7 Group Settings ……………………………………………………………………D-24
3.8 Test for the Specimen for Obtaining the Correction Value ………………… D-26
3.8.1 Setting the Specimen for Obtaining the Correction Value ………………………… D-26
3.8.2 Executing the Test …………………………………………………………………… D-26
3.9 Correction Value Setup ……………………………………………………… D-28
3.10 Setting the Specimen ………………………………………………………… D-29
3.11 Executing the Test …………………………………………………………… D-30
3.11.1 Executing the Test (First Point) ……………………………………………………… D-30
3.11.2 ConrmingtheTestResults(FirstPoint) ………………………………………………D-31
3.11.3 Executing the Test (Second Point) …………………………………………………… D-32
3.11.4 ConrmingtheTestResults(SecondPoint) ………………………………………… D-34
3.11.5 Testing from the Third Point Onwards ……………………………………………… D-34
3.12 Retesting ……………………………………………………………………… D-35