••
••
Outdoor:
You can use the
Outdoor
color profile as an alternative to the
Cloudy
and
Sunny
profiles. This profile is best suited for changing outdoor illumination
(sun, clouds, etc.).
••
••
Sunny:
This setting improves the image colors with mostly clear skies and a lot of
sunshine. Use this color profile to automatically set the white balance.
••
••
Fluorescent Lamp:
This setting improves the image colors if fluorescent lamps are the primary
source of light. Use this color profile to automatically set the white balance.
••
••
Incandescent Lamp:
This setting improves the image colors if incandescent lamps are the primary
source of light. Use this color profile to automatically set the white balance.
••
••
Gray World:
In backlight situations, the camera image may display colored fringes where
image areas are too bright. This color profile will reduce or even prevent this
effect from showing. Compare the results of using this color profile to the
Automatic WB
profile, especially if you are using the camera as a webcam
for country scenery, for example.
Color Saturation: Use this parameter to increase/decrease the color saturation of
the image. A value of "-10" creates an image without color, i.e. a monochrome B/W
image. The higher the defined value, the more color is displayed in the image.
Blue Balance, Red Balance: On top of automatic color correction, you can adjust
the blue/red balance when required (the green portion cannot be changed).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
115/288
Software Camera Manual Part 2
Different color profiles
for different illumination
Note
White balance is difficult for sources of light with a spectrum that is
not continuous, such as sodium vapour lamps, for example. This is not
a limitation of the MOBOTIX camera. Obtaining proper values for white
balance is not possible in this case due to the laws of physics.
To Next Page
Loading...
