9.9.4 Configuring a MOBOTIX Camera for SIP Video Telephony
In addition to the settings for SIP (voice) telephony, (see sections 9.7.2 and 9.8.2),
you only need to set a few extra parameters before you can use SIP video.
• Video Settings: Make sure that the transmission of video signals has been
activated (Admin Menu > VoIP Settings).
• Deactivate the PIN in Admin Menu > Phone Call-In, if the MOBOTIX camera
should automatically accept the inbound call from the softphone. The cam-
era will thus start sending the video stream to the softphone once the con-
nection has been established.
In addition, you can disable the Welcome Message (set to
–
none -
) and you
could also prevent the camera from hanging up automatically by setting
Hangup call after to
Never
. Making these settings allows keeping a perma-
nent connection between the softphone and the MOBOTIX camera.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
272/288
Software Camera Manual Part 2
To Next Page
Loading...
