Mobotix M22 - Simultaneously Displaying Several Cameras with High Image Rates

The MOBOTIX MxPEG format in connection with MOBOTIX cameras is the only
solution fulfilling these requirements. The MOBOTIX concept offers a three times
higher compression rate than Motion JPEG while only 30 percent of the computing
power is needed (as compared to MPEG4).
4.11.2 Simultaneously Displaying Several Cameras with High Image Rates
In order to display as many cameras as possible with the highest frame rate on
one monitor using just one computer, the following requirements must be met (see
also section 4.10.6,
Windows Processes ).
Hardware:
• Standard computer (e.g. Pentium 4, 3 GHz, 1GB RAM)
• 1 Gbps network card
• High-performance graphics card (e.g. DVI, 128 MB RAM)
• High-performance TFT monitor (e.g. Samsung 243 T, 1920x1200 pixels)
• High-performance 1 Gbps switch (e.g. Allied Telesyn AT-8350)
• MOBOTIX M10, D10, V12 or M22 cameras
• MOBOTIX NPR-20 or NPR-8
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
57/288
Software Camera Manual Part 2
High-performance system
consisting of MOBOTIX
cameras, Windows compu-
ter running MxViewer and
external ring buffer sto-
rage on servers